Electromagnetic Field Detector

[kurtykurt42]

I have been researching Electromagnetic Field Detectors (EMF) and have found them to be very accurate. With this instrument it is possible to locate and track energy sources. It will detect fluctuations in electromagnetic fields and low strength moving EMF fields that have no source. It is a common theory that interdimensial entities (spirits) disrupt this field in such a way that you can tell one is present by higher than normal readings with this meter. 

Here are what a few expensive EMF detectors look like:

TES1394 ElectroMagnetic Field EMF Tester  ($300)



eME3851A EMF Meter, Gaussmeter & Electric Field Detector ($700)




They all work in a similar fashion. EMF detectors use highly-sensitive components to find fluctuations in the amount of electric or magnetic energy in a given area. If a metal object is lifted up on a non-conductive support and touched against the sensor wire, the sensor can detect whether that object has an electrostatic potential of as little as one volt. Most of these devices have built in Gaussmeters (magnetic field detector), which is why they are so expensive.

I will be building both an EMF detector and a Gaussmeter that will work the same way as these ridiculously overpriced gadgets. Here are a few examples of homemade models that use microcontrollers and LCD displays to produce identical results as the meters above.

[Dragohad]

think u can give me instructions on how to make one with the items you need? it'll be very much appreciated.

[Ignazio]

Do you think it can attract people who are projecting?

[kurtykurt42]

I will have both the Magnetic field detector and EMF detector set up near me when I am practcing trance meditation. Usually I am able to contact entites and talk to them with relative ease. I will ask them if they would come back with me to the point in space where these detectors are and I will use them to measure the energy field put off by the entity.

The EMF detector is used to locate sources of electromagnetic radiation and to offer a reading of the relative strength (and direction if you are a skilled and competent operator) of the EM field. It is commonly understood among paranormal investigators that spirits do emit an extremely low frequency EM field (i.e. less than 60 Hz) which commonly registers between 2.0 and 7.0 mG in strength. Although, I have read reports of spirit energies in excess of 10.0 mG and some incidents have registered readings over 100 mG when spirits have made their presence known. I'm guessing this depends upon the astral plane they are inhabiting, since the higher planes seem to require more energy.

[Dragohad]

umm...kurty?....i dont think you answered me on if you can put up how to put together a emf sensor......given the materials you have. cuz i can only assume if you dont that you dont know how and are using a store bought one. just curious as to how to put 1 together...and maybe use one for my practices.

[kurtykurt42]

I think you'll be able to tell the difference between a store bought one and the one I'm mounting on a breadboard using an Arduino and an LCD. Here are a couple of How To guides for you if your interested:

http://www.aaronalai.com/emf-detector
http://www.instructables.com/id/S696RILFV4LSABI/