Astral Projection Device

[Questioner]

I know this is off-topic,but do tell me more about atlantis.
Perhaps direct me to a thread or PM?

[kurtykurt42]

I thought of an idea for pouring the resin without causing the magnets to attract to each other during the process. I will pour a mold around 1/2" diameter metal rods inserted in the mold and then pour the resin. Once it hardens I will remove the rods and should have nice little slots for the magnets to go in. While the resin is being poured I will also position the crystal and coil in the resin as well. I am still working on the dimensions of everything so if anyone has any ideas I would be happy to hear them.

[SkepticBoy]

So when you doing the experiment with the hourglass pls.

[kurtykurt42]

What and your seriously going to sit there and defend a person claiming to be able to slow and speed up time by 4 minutes?

Time cant be sped up or slowed down at will. That is not a belief that is a fact.

I don't understand why you seem to be so interested since you KNOW that time can't be accelerated/decelerated at will.

[SkepticBoy]

Once we see the hourglass is not effected then it will be confirmed.

[CFTraveler]

Once we see the hourglass is not effected then it will be confirmed.

That's the problem with trying to prove a negative- that it can't be confirmed that time.

[kurtykurt42]

I received the magnets today so I went to go buy some fiberglass resin to practice pouring, so that I don't waste the good stuff (Silmar 41 Clear Polyester Resin ). I also purchased a few different types of metals. After researching orgonite, I have found that the density levels of the metals in the resin relate to the purpose of the device, as well as the external stimulus (ie. Magnetic fields, Scalar waves, heat, light, sound, etc.). Since this device will actively produce both Magnetic fields and Scalar waves it is a good idea to use very high density metals that are non-magnetic. The closer and more compact these metals are to the crystal the better. The metals I have chosen to use are gold, copper and possibly brass.

I decided to use a cardboard template to hold the magnets and crystal in place. The resin will then be poured about half way up the magnet and allowed to harden. The templates will then be removed and the rest of the resin will be poured. I am in the process of coming up with the 'energy program'.

[kurtykurt42]

Here's an update on my astral projection device. When I started this experiment it was my attempt at using technology to aid in astral projection. I believe this is possible. These experiments are my attempt to better understand Scalar Waves and Torsion Fields and the effects they have with matter, consciousness and energy, as well as space and time.

[Questioner]

I don't know if bumping this is breaking any rules,but what happened here?did you move these results to a new thread?

[thirdeye26]

I am afraid it sounds a bit too technical for me; and I wonder if I will be able to do it. But aren't these artificial techniques of astral projection induction a bit scary? I mean, don't they have certain disadvantages? In other words, are they safe?

[kurtykurt42]

It is pretty technical but you don't need to understand how it works to use it!





I have been using a separate bed / pillow / chair with the 'Astral Projection Device' (the thing on the left) and have been having great results. I have designed a series of thought based energy programs that are stored into the crystal sphere. I have found that when a particular feeling / emotion is felt, that same feeling can be stored in the crystal and be called upon at any time. For example the warm, heavy, lethargic feeling that one feels when you enter into the trance state can be stored into the crystal. All i do is say 'trance on' and I immediately enter trance. If people are interested I will post the Astral Projection Subroutine that I designed but it is rather lengthy.

Many people don't like the idea of using technology or drugs to help them astral project or have out of body experiences. I would just like to say that using technology to astral project is not the same as using a drug. Especially if you are the one the develops your own personal assistive technology to help with the OBE process. I believe that the body is an extension of your consciousness and when we astral project / OBE / dream we are moving our consciousness through it. Moving your consciousness through a machine is similar. The machine is also an extension. It can be tunned to a vibration you recognize until finally you begin to recognize any frequency. The machine is used to widen your exploration abilities beyond the bodies normal sense frequencies.

[Questioner]

You automatically enter trance?So you can enter trance on command?
Wow,you must be able to AP pretty much whenever you want!

I would love to build such a device,but i have no space and my family would call me a loon.

[kurtykurt42]

Entering trance on command is a little easier than astral projecting on command.

Although, I was able to project yesterday using the astral projection subroutine I designed: http://www.astralpulse.com/forums/welcome_to_out_of_body_experiences/projection_to_rtz_verified-t30759.0.html

My goal is to somehow store energy into the crystal / generator and pipe it into my energy body, so that I can not only astral project on command but stay out of body for extended periods as well.

[kurtykurt42]

The calcite crystal sphere on the left weighs 10 lbs and can generate incredible amounts of energy. The black / white coil around the iron core is set at 25 MHz. The Arduino microcontroller (on the cage) has been programmed to incrementally increase frequency from 1 Hz to 1 MHz. It is attached to the coil around the bismuth and can be felt with the third eye / pineal when it vibrates at its peak resonant frequency.

While sitting as close to the device as possible I enter trance meditation and wait until the the bismuth / coil begins to resonate. I have been asking the help of my spiritual guides / subconscious to assist me with this as well. I now have it set at 160 Khz and as soon as I enter the room my entire head starts to vibrate!



- - - - - -

I added an LCD to the Arduino so that you can read the frequency output on the LCD. The LCD also uses a keypad which allows the user to increase / decrease the frequency manually. 





- - - - - -

For those that are interested I have posted a paper on the physics behind this assistive technology and it's effects on the energy body and probable applications for astral projection and energy body development.

Astral Projection Device

[joel1212]

  all i gotta say is wow kurt, lol. you really know what ur doing..
keep it up!

[kurtykurt42]

If you're interested in any of this be sure to check out my website:

http://mindbasedtechnology.com/

My research into nonlinear optics has introduced me to the importance of both the phi ratio (φ) or the Golden Ratio, as well as the pi/2 ratio.

In mathematics and the arts, two quantities are in the golden ratio if the ratio of the sum of the quantities to the larger quantity is equal to (=) the ratio of the larger quantity to the smaller one. The golden ratio is an irrational mathematical constant, approximately 1.6180339887. Other names frequently used for the golden ratio are the golden section (Latin: sectio aurea) and golden mean. Other terms encountered include extreme and mean ratio, medial section, divine proportion, divine section (Latin: sectio divina), golden proportion, golden cut, golden number, and mean of Phidias. The golden ratio is often denoted by the Greek letter phi, usually lower case (φ).



Examples of the golden ratio (φ):





In relation to the human energy body, when combining two frequency vibrations in these ratios very strong vibratory effects are produced and felt in all seven primary energy centers (especially the third eye). In his book, Principles of Nonlinear Optics, Y.R. Shen describes how three frequencies are used to create a pressure layer, 3 pi/2 frequencies, with two phi ratios from each side. They will overlap to one layer at the center.

[ Pi / 2 ] Multiple Layered Resonance

The Norway spiral had two beams. One to the outer ring [light color] and one down the center of it [blue high frequency]. There was a ratio set up in the wave patterns such that at fixed distance a phi vortex was opened, and later it was shut down by reversing it. The rings were never stabilized at pi/2 or the form would have stabilized into circles.



More examples of the golden ratio (Phi):

It's a dynamic between spin and stillness , the feedback structure that makes information continuously flow through our universe.





Here I am combining two frequency vibrations in these ratios to produce the spatial overlap at the center.



The base of the device is composed of two iron [Ferrite] deflection yokes that were taken from CRT monitors. Iron is the most abundant metal on earth, and is believed to be the tenth most abundant element in the universe. The nucleus of iron has the highest binding energy per nucleon, so it is the heaviest element that is produced exothermically through fusion and the lightest through fission. When a star that has sufficient mass to produce iron does so, it can no longer produce energy in its core and a supernova will ensue.

Due to the high magnetic resonance (NMR) of Iron, high frequencies must be used (i.e. 7 - 20 MHz). When the iron atoms become electromagnetically charged the electron shells become magnetic and a strong field is created and sensed by the energy body. This has the effect of greatly speeding up the meditative process. I have been having using 12 MHz with the black/white coil around the iron core.







The Mayen calender and the device I am working on seem to look pretty similar.  

2012, 12 crystals, 12 neodymium magnets, 12 twists in the bismuth scalar coils, 12 MHz, etc...

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Magnetism and Bismuth:

A neodymium magnet is a permanent magnet made from an alloy of neodymium, iron, and boron to form the Nd2Fe14B tetragonal crystalline structure. This material is currently the strongest type of permanent magnet.



The most diamagneitc material on earth [Bismuth] is used to create a magnetic field in opposition of an externally applied magnetic field. Bismuth is the heaviest form of crystal on earth. The largest atom that is atomically stable and it can vibrate just the same as a quartz crystal. After working with the weave wind (scalar) coils, I have learned learn how to do this without them. Hold a Bismuth slug in a hand, and vibrate it up as though it were a crystal. A field will rise out of it and become coherent very fast.

The heavy elements can reach levity faster then the light ones supposedly, due to increased energy in each atom. Within the space of a Bismuth atom there if far greater light and vibration present, then in a hydrogen atom.



Molecular structure of Bismuth:



This week I studied more on the golden section and experimented with various golden section frequencies.



Frequencies:

12 * 12 = 144 Hz [Square Wave (+5V) Bismuth Coil]

144 Hz * 1.618 = 233 Hz [Square Wave (+5V) Crystal Sphere Coil]

12 MHz [Sine Wave (+3.5V) Black/white Iron Coil]

Using 144 Hz applied to the lower end of the iron with the bismuth and 233 Hz applied to the upper end (crystal), a very powerful energetic outflow was created. Touching the base of the device with the hands created a strong tingling sensation and after about 30 seconds my hand began to burn. Palming the device at various points, I could feel a cool brieze around the device, as if a fan was on.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

After spending the week experimenting with the pi/2 ratio I have found it to be much more soothing than the phi ratios. While experimenting with Phi I have gone several nights without dreaming as well as getting tired frequently. The phi vortex seems to suck in all energy to the center allowing you to enter very deep states of trance relatively easily.

Although, I have only been experimenting with pi/2 for a couple of days, it definitely seems to be much nicer!  



The two bismuth scalar coils are separated by a (pi/2) ratio, while the iron core is vibrating at 12 MHz.

Here is an image of the oscilloscope for the two microcontrollers:



Freq 1 -  12 MHz [Iron]

Freq 2 -  59.52 Hz

Freq 3 -  37.88 Hz

pi / 2 = 1.57079

37.88 Hz * 1.57079  = 59.50 Hz

(low frequency square waves seem to work best with the bismuth/scalar coils)

After spending a couple weeks with each of the two frequency vibrations ( phi vs. pi/2 ) I am come the following conclusions:

Pi / 2 - Seems to be where stable boundaries form and Orientation is possible,
synchronization happens on pi / 2 ratio levels, these mark the density levels
or the target locations.

Phi - Generates uncontrolled dissorientation, as it dislodges from a
boundary and either accelerates or decelerates the conscious clock rate.
It opens one to astral projection / remote viewing into infinity.

What's that big stainless steel circle for! 

[kurtykurt42]

[camci]

Just read through ALL these posts.

I'm not literate in computer/technical talk, but just to get the gist..

You're making a machine that makes it possible for people like me who have not been able to project.. to project?

If such a machine is possible, you'd make millions and make headlines.

Who WOULDN'T want a gadget like that?

[nickspry]

What I'd like to know is, assuming this device works, what are you going to do with it? Is this just for your own use, or are you planning to make it available to the masses? You may have to go underground of course, to avoid those black-ops "pursuaders".....

[Timandra]

That crop circle is beautiful! 

[kurtykurt42]

You're making a machine that makes it possible for people like me who have not been able to project.. to project?

If such a machine is possible, you'd make millions and make headlines.

Who WOULDN'T want a gadget like that?

Yes indeed, absolutely every person that sits down in the chair will be able to astral project. It may take a little bit of time to practice before you can get used to the 'feeling' and conquer your fears. But it greatly speeds up the process.

I'm not very interested in making headlines or millions of dollars. If I do make millions I wall probably spend it all on the devlopment of more of this kind of technology.

What I'd like to know is, assuming this device works, what are you going to do with it? Is this just for your own use, or are you planning to make it available to the masses? You may have to go underground of course, to avoid those black-ops "pursuaders".....

Well, I don't think that the government would like it if I started selling it at Walmart. For now I'm afraid it's just for personal use.

[sahgwa]

Hi Kurt
this is fascinating. I found it while searching for 'gold' and 'astral projection' . The reason is I read that A. Crowley used a gold coin ni his mouth to help induce astral projection.  My main question is (very impt to me thanks is gold necessary for this?  Would other coins work as well? Please let me know why this would or wouldn't work and if gold is necessary.  I tried it with a pound coin which is mostly copper and it seemed to cause more energy or vibration but I'd like to know if it was a placebo.  Please PM me or email thanks!
Chris

[kurtykurt42]

Gold? I don't even use gold in this device. I sure wish I had enough money to chew on gold coins though! 

I don't think gold would work well in this device as a base component or any component for that matter. Iron is much better for inducing deep meditative states due to the high nuclear magnetic resonance. Bismuth would also be much better to use than gold too.

[Timandra]

I've been to a shop to look for a crystal sphere like yours Kurt, but they had only much smaller ones and they cost already 83,- Euro, which is 113,- dollars. Then the larger ones must cost hundreds of dollars?   

[sahgwa]

Thanks for the tip.  So say I get a bismuth sample, in a coin or a lump.  Besides the tongue as a sensitive point what else can one do with said sample to aid astral projection? Does holding it in the palm or under a pillow help? like with crystals?
thanks again. good luck with your device and keep us all posted.its fascinating.